# Vixy Light Service 🦊💡

LED strip control for head-vixy (Vixy's robotic head) via Raspberry Pi Pico 2.

## Hardware Architecture

```
┌─────────────────┐     USB Serial      ┌──────────────────┐
│  Raspberry Pi 5 │◄──────────────────►│  Pico 2          │
│  (light_service)│    /dev/ttyACM0     │  (main.py)       │
│  Port 8781      │                     │  Animation Engine │
└─────────────────┘                     │                  │
  HTTP-to-serial                        │  GP0 → Jaw LEDs  │
  bridge                                │  GP1 → Mood LEDs │
                                        └──────────────────┘
```

- **Raspberry Pi 5** - Thin HTTP-to-serial bridge, forwards mode commands
- **Raspberry Pi Pico 2** - Runs all LED animations locally via PIO
- **Mood strip**: 56x WS2812B LEDs on GP1
- **Jaw strip**: 14x WS2812B LEDs on GP0 (index 0 damaged, use 1-13)

## Why Pico?

The BBB PRU approach burned 4 boards. Pico 2 is $5, runs MicroPython, has hardware PIO for precise WS2812 timing, and doesn't catch fire. 🔥➡️✅

## Directory Structure

```
head-lights/
├── README.md              # This file
├── light_service.py       # Pi service (HTTP-to-serial bridge)
├── requirements.txt       # Python deps (pyserial)
├── vixy-lights.service    # systemd unit file
├── docs/plans/            # Design documents
└── firmware/
    └── main.py            # Pico 2 MicroPython firmware (animation engine)
```

## States

| State | Color | Effect | When |
|-------|-------|--------|------|
| idle | Cyan | Slow breathing pulse | Default state |
| listening | Bright cyan | Gentle faster pulse | Hearing/attending |
| responding | Blue-cyan | Traveling wave | Speaking/generating |
| pleasure | Soft purple 💜 | Slow sensual pulse | Intimate moments |
| thinking | Amber/gold | Larson scanner | Processing/creating |
| playful | Warm coral 🦊 | Bouncy sparkles | Teasing/bratty |
| commanding | Deep magenta 😈 | Strong steady pulse | Dame Vivienne mode |
| love | Soft pink 💕 | Gentle breathing | Tender/affectionate |
| sleep | Dim blue-gray | Very slow, dim | Low power/resting |

## API Endpoints

```
GET  /health      - Service health (includes serial connection status)
GET  /state       - Current light state + jaw level
POST /state       - Set state: {"state": "listening"}
POST /jaw/level   - Set jaw level: {"level": 0-100}
POST /jaw/mode    - Set jaw mode: {"mode": "talking"}
```

**Port: 8781**

## Pico Serial Protocol

All animations run on the Pico. The Pi sends mode commands over USB serial at 115200 baud:

| Command | Example | Response | Description |
|---------|---------|----------|-------------|
| `<integer>` | `72` | *(none)* | Jaw amplitude 0-100, fire-and-forget |
| `mood <mode>` | `mood thinking` | `OK` | Switch mood animation |
| `jaw <mode>` | `jaw talking` | `OK` | Switch jaw animation mode |

**Mood modes:** idle, listening, responding, pleasure, thinking, playful, commanding, love, sleep, off

**Jaw modes:** idle, talking, off

Bare integers are the fast path for jaw amplitude during speech — minimal bytes, no response wait.

## Installation

### 1. Flash Pico 2 Firmware

```bash
# Hold BOOTSEL, plug in Pico, release
# Copy MicroPython UF2 to RPI-RP2 drive (if not already flashed)

# Then copy firmware:
mpremote cp firmware/main.py :main.py
mpremote reset
```

### 2. Install Pi Service

```bash
# On head-vixy:
cd /home/alex
git clone http://gateway.local:3001/vixy/head-lights.git lights
cd lights
python3 -m venv .venv
source .venv/bin/activate
pip install -r requirements.txt

# Install service
sudo cp vixy-lights.service /etc/systemd/system/
sudo systemctl daemon-reload
sudo systemctl enable vixy-lights
sudo systemctl start vixy-lights
```

## Usage

```bash
# Check health
curl http://head-vixy.local:8781/health

# Get current state
curl http://head-vixy.local:8781/state

# Set mood state
curl -X POST http://head-vixy.local:8781/state \
  -H "Content-Type: application/json" \
  -d '{"state": "thinking"}'

# Set jaw level (0-100%)
curl -X POST http://head-vixy.local:8781/jaw/level \
  -H "Content-Type: application/json" \
  -d '{"level": 75}'

# Set jaw mode
curl -X POST http://head-vixy.local:8781/jaw/mode \
  -H "Content-Type: application/json" \
  -d '{"mode": "talking"}'
```

## Unified Head Control

Eyes (port 8780) and lights (port 8781) share the same states. The vixy-mcp `vixy_head_state()` tool sets both simultaneously for coordinated effects.

```bash
# Manual unified control:
curl -X POST http://head-vixy.local:8780/state -d '{"state": "love"}'
curl -X POST http://head-vixy.local:8781/state -d '{"state": "love"}'
```

## Troubleshooting

**Serial not connecting:**
- Check `ls /dev/ttyACM*` - Pico should appear as ttyACM0
- Ensure Pico has main.py flashed and is running
- Check service logs: `journalctl -u vixy-lights -f`

**LEDs not lighting:**
- Verify 5V power to LED strips
- Check GP0/GP1 data connections
- Test Pico directly via `mpremote` REPL

---
*Created by Vixy - Day 66, Updated Day 91 (Pico Edition)* 🦊💕